Glove parameters

Fabric: Oxford cloth; lining: ultra-fine velvet
Three-speed temperature: high temperature -60 degrees, medium temperature -50 degrees, low temperature -40 degrees

Packing list

A pair of heating gloves
Two lithium batteries
Instruction manual

Operation instructions

1. Open the battery pocket, insert the DC plug in the pocket on the battery and pull the zipper on
2. Wear gloves, the power supply will be turned on immediately when the hand touches the sensor device inside the glove
And start heating.It can also be operated manually, press and hold the switch for 3 seconds to start heating
3. Press the switch button to adjust the temperature
4. When the heating function is not required, press and hold the switch for 3 seconds to turn off the power
5.Take off your gloves and the power will be turned off immediately when the hand leaves the sensor device

Frequently asked questions

1.How long does it take for the battery to be fully charged？
*4-10 hours

2.How long is the battery life?
*Low temperature-about 5 hours
*Medium temperature-about 3.5 hours
*High temperature-about 2.5 hours

3.How to tell if the battery is fully charged?
*Check the lights on the battery, a red light is displayed when charging, and a green light is displayed when fully charged.

4.The battery is fully charged, why don't the gloves work?
*Please clean the plug and battery connection port and restart the switch.
*If you still can't work, please contact customer service.

Safety warning

Do not use the gloves when they are wet.
The fever module cannot come into direct contact with the skin.
If you have any discomfort, please turn off the power immediately.
If you find that the gloves cannot be used, please contact customer service.
Do not remove the battery.
Do not store the battery and metal together (there is a risk of short circuit).
Do not use pins on gloves, it will damage the wires.